SAE J1980 Guidelines for Evaluating Out-of-Position Vehicle Occupant Interactions with Deploying Frontal Airbags

时间:2024-05-05 21:20:24 来源: 标准资料网 作者:标准资料网 阅读:9815
下载地址: 点击此处下载
Product Code:SAE J1980
Title:Guidelines for Evaluating Out-of-Position Vehicle Occupant Interactions with Deploying Frontal Airbags
Issuing Committee:Human Biomechanics And Simulations Standards Steering Cmte
Scope:An airbag generates a considerable amount of kinetic energy during its inflation process. As a result substantial forces can be developed between the deploying airbag and the out-of-position occupant. Accident data and laboratory test results have indicated a potential for head, neck, chest, abdominal, and leg injuries from these forces. This suggests that mitigating such forces should be considered in the design of airbag restraint systems.This document outlines a comprehensive set of test guidelines that can be used for investigating the interactions that occur between the deploying airbag and the occupant who is near the module at the time of deployment. Static and dynamic tests to investigate driver and passenger systems are given. Static tests may be used to sort designs on a comparative basis. Designs that make it through the static sorting procedure may be subjected to the appropriate dynamic tests. On a specific vehicle model, engineering judgment based upon prior experience in airbag testing may make it unnecessary to conduct the tests identified by the document or may indicate that different tests should be conducted.Mild severity and moderate severity crash pulses are described in Section 5. These pulses are not vehicle-specific, but represent a general acceleration-time history that approximates what occurs with a large variety of vehicles. The mild severity crash pulse is near the threshold of many airbag deployments and represents a high-frequency accident event. Since small children are more likely than adults to be out of position due to preimpact braking, this pulse can be used for the child tests. Since preimpact braking has much less of an effect on adults, the moderate severity crash pulse can be used for adult testing. The described pulses or other vehicle specific pulses may be used.No performance limits are specified in this document. References 2.1.4 2 and 16 gives interpretations of dummy responses relative to human injury
【英文标准名称】:Copperandcopperalloys-Combustionmethodfordeterminationofcarbonontheinnersurfaceofcoppertubesorfittings
【原文标准名称】:铜和铜合金.铜管道和接头的内表面积碳测定的燃烧方法
【标准号】:BSEN723-1996
【标准状态】:作废
【国别】:英国
【发布日期】:1996-12-15
【实施或试行日期】:1996-12-15
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:管;内部;试样;分光光度法;试样制备;红外线辐射;表面;准确度;铜;燃烧试验法;管道配件;铜合金;校正;电学测量;电导性;气体分析;化学分析和试验;碳;含量测定
【英文主题词】:Carbon;Carboncontent;Chemicalanalysisandtesting;Circulartubes;Combustiontestmethods;Copper;Copperpipes;Coppertubes;Definitions;Determinationofcontent;Infraredabsorption;Infraredspectroscopy;Pipes;Rolling;Samplingmethods;Specimenpreparation;Surfaces
【摘要】:ThisEuropeanStandardspecifiesacombustionmethodfordeterminingthecarboncontent,ifany,ontheinnersurfaceofcoppertubesorcopperfittings.ThisstandardappliesonlytoroundcoppertubesasspecifiedinEN1057orcopperfittingsasspecifiedinprEN1254-1andprEN1254-5.
【中国标准分类号】:J31
【国际标准分类号】:77_150_30
【页数】:12P.;A4
【正文语种】:英语


【英文标准名称】:Welding-Acceptanceinspectionofelectronbeamweldingmachines-Part1:principlesandacceptanceconditions.
【原文标准名称】:焊接.电子束焊接机的验收检验.第1部分:原则和验收条件
【标准号】:NFA89-700-1-2000
【标准状态】:作废
【国别】:法国
【发布日期】:2000-09-01
【实施或试行日期】:2000-09-05
【发布单位】:法国标准化协会(AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:Acceptanceinspection;Acceptancespecification;Basis;Beamcurrent;Electricwelding;Electronbeams;Electron-beamwelding;Fusionwelding;Inspection;Lenscurrent;Movementaccuracy;Ratings;Speed;Symbols;Testing;Tolerances(measurement);Welding;Weldingengineering;Weldingequipment;Weldingmachines;Weldingparameters;Weldingpointpositiontolerance
【摘要】:
【中国标准分类号】:J61
【国际标准分类号】:25_160_30
【页数】:14P.;A4
【正文语种】:其他